Good Trailers are unique, which means sometimes the technical issues that come with them are unique too. While most people use their Good Trailers without any problems at all, any machine can give users problems sometimes.
GoodMFG® is committed to ensuring customers have a great experience. The Troubleshooting Your Trailer Guide will help you pinpoint the most common Good Trailer problems and solutions.
Table of Contents
Hydraulics Won't Engage
Problem: Good Trailer hydraulics won’t engage.
Solution: The most common reason hydraulics won’t engage is the toggle clamp and cyliner lock haven’t been properly raised and secured.
- Locate the toggle clamps behind each wheel.
2. Raise and secure. Pull each toggle clamp up. Then, pull the corresponding cylinder lock forward and secure it to the toggle clamp.
3. Repeat. Ensure this is done for all toggle clamps and cylinder locks on your trailer.
Note: Newer versions of Good Trailers may have slight variations in toggle clamp and cylinder lock design, but the principle of securing them remains the same.
For fully detailed instructions and video, refer to: How to Use Your Hydraulic Drop Deck System.
Tow Bar Won't Fold
Problem: Good Trailer Tow Bar won’t fold.
Solution: There are two common issues that prevent the tow bar from folding.
- Stuck C-brackets. If you’re trying to fold the tow bar while the trailer is already on the ground, it can block the removal of C-brackets. Use your remote to temporarily raise the front of the trailer slightly, just enough to remove them.
2. Stuck square tube pins. Square tube pins slide in and out of the sides of your tow bar and can get pinched. Try lifting the tow bar slightly to relieve any pinching, allowing the pins to slide freely.
For full instructions on how to raise and lower your tow bar, refer to: How to Use your Folding Tow Bar.
Trailer Won't Tow
Problem: Good Trailer Won’t Tow
Solution: If your Good Trailer won’t tow, the most likely cause is your breakaway brake system is engaged. Locate the breakaway brake box and ensure the pin is fully inserted into the switch.
Caution! Never attempt to tow the trailer with the breakaway brake system engaged. Doing so will cause your brakes to overheat and become inoperable, causing a serious safety hazard.
For more information about your breakaway brake system, why it’s important, and how it works, refer to: “How a Breakaway Switch Works on a Trailer.”
Get Additional Help
Most people use their trailers without, well, a hitch! But every trailer and every operator is unique. If you’re having trouble with your Good Trailer, you’re always welcome to call us at (360) 889-9789. Our team is always happy to help!
See also:
5 Signs Your Trailer Needs Repair
